Day 8: Wish We Could Turn Back Time…

…But now we’re stressed out! That’s right, today we were able to play with really cool smart devices that allowed us to track certain responses of the body including stress levels! We actually met our mentor for today, Robert, yesterday when he came in to hook us up to a smartwatch when we were experimenting with the virtual reality “Oculus Rift” technology. This was his first experiment recording the body’s response to a person being submerged into virtual reality, and the data that was collected was very surprising and cool!

Me using the “Oculus Rift” virtual reality headset with my body’s response to being in the virtual reality state:

KTW

In the graph above, the blue line indicates my stress level, which is shown to be steadily and constantly increasing. This stress level had the same increasing tendency for all three of us interns, which shows that virtual reality may not be healthy for the body if it constantly increases our stress levels the longer that we are in it. This experiment is prompting Robert to continue analyzing stress levels for people who are submerged into virtual reality, and he considers this new knowledge to be revolutionary! Can you believe that we were the guinea pigs for revolutionary knowledge?! After learning about stress in the human body, we were suited up with complimentary fitbit zips that we got to keep! With the fitbit zip we tracked the accuracy of number of steps taken using the fitbit, apple watch, and “Moves” app. We walked on a treadmill for 5 minutes while all of the devices were counting and while someone else counted the actual number of steps we took. We found that the fitbit was the most reliable source because the number pf steps that it counted were closest to the number of actual steps.

Jonathan on the treadmill with his devices counting the number of steps he took:

IMG_1036

Then, just for fun (and for science :)), we decided we should try to cheat the fitbit and rack up as many steps as we could. For our first experiment we taped the fitbit onto a drill bit, and turned the drill on. Surprisingly, all of the quick rotations that the fitbit made did not contribute to a large number of steps taken. Then, for our second experiment, we duct taped the fitbit to the wheel of Robert’s car and we observed how many steps were recorded as Robert drove around. The fitbit racked up some steps, but not as much as expected. I guess if you want steps you have to actually exercise!

The fitbit duct taped to the wheel of Robert’s car:

IMG_1045

Today was a really fun day since we got to come up with our own experiments and execute them! We also learned that we may have revolutionized virtual reality, so that was cool! Overall it was a really great way to end our internship at RTI, although it was also sad to say goodbye to the Work Experience Program. For me this program has been a huge success, and I hope it continues being implemented and offered to Cary Academy students in future years! – Kiran W.

Day 7- A Day at The Circus

Today was my last day at Camp Royall :(( After setting up the Courtyard Art for campers, I worked on organizing the Arts and Crafts activity with the other Activity Directors. The theme for the day was “The Circus” which means crafts included cotton candy painting, lion masks, and clown coloring sheets. Another activity that day was boating and after helping get out the boats I actually got to help lead the activity! I got to tell campers and their counselors what each station was and play with campers at the bubbles and corn hole stations while they waited for the boats.


After lunch, I helped with the evening acitivity which was set up to look like the circus to follow the theme. The playground was covered in a parachute to look like a circus tent and circus music was playing while activities included a “flying trapeze” or a zip line and a face painting station. This was by far the best activity I got to help out with! After cleaning up the amazing activity directors I have been working with for the past two days presented me with a going away gift.


I am so grateful to have been able to volunteer at such an amazing place! I will definitely be going back to volunteer this summer and hopeful will go as a counselor in the future!

– Fiona

Just Crush It

Did I ever think I would spend my time crushing butter-mints…not quite.

IMG_20160602_104126420.jpg

No longer minty fresh 

It turns out it’s a lot of fun! Phil taught me the formatting of a real lab experiment by doing a mini experiment on butter-mints, a pretty big change of pace from our previous tests. Basically, we measured the durability (specifically how much force it can take before it splits) of the mints on a Chantillon 200 LBF machine. After I collected the data we discussed possible variables and then Phil gave me a crash course in Excel. He also explained various statistics used for data analysis like ANOVA, and Pvalues.

Excel Data: Butter Mint Crush

Next, we ventured to NC State to meet a group of scientists that work in a BSL3 lab, which is a lab containing “safety” chemicals that can be harmful to humans and could possibly be used detrimentally in large quantities. The purpose of the meeting was to discuss proper safety procedures and determine how to manage the various pathogens being used. Phil and Jean are involved in a study that is about to take place concerning the Zika virus and its effects on cells and tissues. It’s important to use extreme care to minimize possible exposures to the diseases being tested in the lab (which includes Rocky Mount Spotted Fever and Bartonella). The coolest part, however, was getting to tour the lab and see how all the safety procedures are implemented.

I ended my last day with a mini staff ice cream party in front of the copy machine (classic) and Sarah showing me the basics of a SEM machine. An SEM machine uses a beam of electrons to chart the typography of the surface of particles. To be completely honest this just means it takes super cool up-close photographs of particles and stuff (kind of like a fancy microscope for materials). The photographs you’ve seen of thread and other fabrics (hair is a popular one for shampoos) close up are probably produced using an SEM machine!

I can’t believe the internship is over! It has been an amazing experience, much better than anything I could have ever imagined and I hope everyone has an opportunity to do something similar before college!

IMG_20160602_162448839.jpg

IMG_20160602_162506536.jpg

Day 8 – Just Listen.

Today was my last day working with Trailblazer Studios, and the last day of the Work Experience Program. I have super happy with my experience and am so glad I was able to do it. At first I was really worried about whether I would enjoy the experience or not, but I am super happy about how it turned out. Now. On to the more important stuff.

I spent the day with a few different people in the Audio/Sound Design department. It wouldn’t be a day at Trailblazer without a Review session. Today’s wasn’t as long as the one yesterday, mostly due to the fact that yesterday we were reviewing a two-hour episode compared to today’s half hour episode. The room was full of people, not that it was a large room, but there were about six of us in a room made to hold like three. This review was also a lot different from the other two I have done. This is because we were looking at it from an audio standpoint and not a visual or content standpoint. It’s not something I’ve done much of before. I wasn’t even able to pick up on a lot of things that these people mentioned, even after I heard it a bunch of times. TBStudios - Surround Sound

After the review, I got a more in depth tour of the Audio Department’s studios. They have one review room, one smaller composing/editing room, one composing/ recording booth suite, and one room that had complete surround sound (Pictured on the right). The guy who usually works in there was sick, but he does the mixing for the bigger projects. Thus the surround sound studio.

After the tour I sat with David, a sound designer and avid guitar player. He does everything from mixing the audio on shows to writing/recording his own music. He was working on a song and he went through his process while creating these songs. He even whipped out his guitar and started playing the song he was showing me.

Once we had all eaten some lunch I sat in with Aaron, director of music and sound operations as well as a composer, and an intern who is working with the sound department for the summer. He showed us the programs he uses to compose and a couple of demos he has worked on over the years. The first thing he showed us was a current project of his, a SAS promotional video. He wasn’t too happy with the music and ended up making a lot of changes to it later in the afternoon. He also showed us some animated shorts that he composed the music for, one of which as a collaboration with another Trailblazer employee. Lastly he showed us the same video clip but with about four different audio tracks/composers. It really showcased how much music affect how one views a commercial and how the tone or beat of the music draws your eye to different parts of the shot. It was an aspect of movies and other kinds of media that I hadn’t really delved into much.

I have really enjoyed my time at Trailblazer Studios and met so many awesome people. I hope that I can work with them again in the future.

Day 7: Goodb-EYE

This was my final day at the Eye Center and even though I had to say goodbye, I didn’t leave without learning some new things. Through shadowing I got to see orbital fractures, hordoleum, and even ocular birthmarks. Hordoleum is an eye infection characterized by swelling on the eye lid or an isolated bump on the eye lid. There was also a case of ocular neoplasm which is pretty much a lesion on the retina. These are usually benign. I got to observe a technician under training to end the day and the experience. Since my experience has become whole, I decided to include a picture that shows the entire exam chair with all of the machinery.

image.jpeg

 

Cameron Day 3 (repost?) – the Mystics of Optical Density

It’s… Get ready for it, HUMPDAY!!!!!

Anyways, hi friends!

Cameron again. I hope everyone is enjoying their week so far. Mine has been especially fabulous, and we started a new activity in preparation for the main project. Yesterday, I cleaned filters and put them in their proper placement. Today I tested the optical density of each, which is where we place them into a machine and run them through the color spectrum, recording how much light gets through. Hers a picture of the machine:


Jason McNeill (in the picture above) was my guide during this activity, and it was quite interesting utilizing the software. Despite several technical difficulties, I ended up processing all 50 plates in time for Jason to check their weights using a very, very picky machine. It took 15 minutes for just one filter at one point!
After helping out Jason, Mrs. Michelle took me to meet Andrew Dart, where we discussed some of the finer points of his machine. This machine, as it so happened to be, was the one we used for ECMs, and is picture below along with Andrew.


Andrew built both this and the extremely complicated machine hidden behind the one we used. It’s pretty awesome! He also works on the fireman project I discussed in my first post. Pretty cool, right? Not to mention he looks kind of like Sherlock from Masterpiece Mysteries…

Anyway, that’s pretty much everything for today.

Happy Humpday everyone!
Cameron L.

Day 6 – Return of the ReTI

Fear ye all who enter here, for…
IIIIIIIIII’mmm baaaaaaaaaaccckkk!
Hey all,

Today’s the first day back for the new week, and I hope everyone had a wonderful day.
For me, I’d call today a good day, if a little on the less exciting side. However, it did start out interesting with a fire truck in front of one of the entrances to RTI, as depicted below:

Never figured out why it was there, but I hope everyone was safe!

Otherwise, there were a ton of meetings, with a right off the back discussion with Dr. Thornburg, Emily, and I on questions with what he does at RTI and his average workday. After meeting Dr. Thornburg, Mrs. Michelle and I shipped out some sensors to one of the projects she started. Here’s a picture of the final packaging:


After that, we went to a safety meeting where I trailed behind lost as they argued over room numbers and the like. Apparently, they were making sure the old building design door numbers and the new blue print door numbers matched up. Interestin, to say the least. Later, Mrs. Allen stopped by for a quick check up and tour by Dr. Thornburg. 

After meeting Mrs. Allen, but before lunch, we learned how to use the software for the new micropems, which we are starting work on tomorrow. For lunch, I had a delicious cheeseburger and onion rings, and happened to meet Jonathan and Kiran who had transferred from to the forensics department of RTI for this week, an unexpected, but welcome, surprise.

After lunch, we retrieved data from some field tests until a meeting with Mr. Mecham, who gave some life tips and shared his background with us, much as with Dr. Thornburg this morning.

That pretty much concludes my day. I hope you all enjoy your day as well!

Sincerely,

Cameron L.

P.S. For those confused with the title’s joke, 1) it’s a reference to Star Wars, and 2) RTI stands for research triangle institute, so I just extended the first word for RTI to make ReTI… So yeah, hope you enjoyed the joke!

Day 7 – “The name’s PEM, Micro PEM.”

Hi all,

So today was a busy day!

We started micropem testing, then had a meeting with Mr. Marty, a chemical engineer at RTI, which lasted an hour and a half. We also visited his labs, but weren’t allowed a picture inside due to defense projects. Here’s one of us outside the door though!

After that was a lunch meeting with Mrs. Swung-Hyun, another worker at RTI in my building (number 11). Both mewing were extremely informative, although I’m partial to Mr. Marty’s myself since I want to be a chemical engineer.

After lunch, I suited up in my testing gear (featured below, excluding the static gun, my inspiration for today’s title) and started collecting data by walking around various areas in the vicinity while the pumps sucked in nearby air.

All in all, an exciting day. I hope you enjoyed my update!

Cameron L.

Spreading Positivity and Final Goodbyes

Well there you have it- just like that I’ve finished my last day of interning at centerline! I woke up this morning just a touch earlier than usual so that I could attend another one of the thursday morning agency talks. I’m not sure if I mentioned this before so I’ll fill you in anyway- this time is typically when the entire building has the chance to come together and watch an employee deliver a talk and share some of the cool stuff they’ve been working on. Today was also the day of my Snap chat takeover where I captured a bit of a day in the life of a student ambassador ( the snap feed is inserted above). However, because it was my final day, I wanted to do something where I can leave just a wee mark of who I am on Centerline one last time. Throughout my weeks at centerline I’ve seen some exceptionally talented individuals who work incredibly hard to put out the best content that they can. Whether it be Valentina and her leadership and communication skills, mike with his artistic abilities, brittany with marketing concepts or Tyler and his infectious creativity, every individual at Centerline has something amazing to contribute. Often in the mix of the fast paced agency environment it seems that maybe people don’t get the time to just sit back and recognize someone that they’re thankful for. So because of that I wanted to focus my Snapchat thread today on going around and asking people who they’re thankful for at centerline. Of course I wanted to make the feed interesting so that people would tune in, but I mainly wanted to just spread a bit of final positivity. Hopefully with that I was able do the best I could with this little opportunity of fun I was given. Throughout the day I also got to work with Courtney, a graphic designer, on making a phone background and some headers. Seeing as I find fonts and colors extremely therapeutic this was absolutely my cup of tea. As the day winded down I chatted with some of the employees that I’ve gotten to know one last time before I headed on back to High School life. It was bittersweet to leave as I’ve met so many wonderful people, had so many opportunities, and have had an experience that has been absolutely invaluable.

Sam and the other Centerliners, as I know you are probably reading this, Thank YOU! I appreciate you all and recognize just how hard you work, and that work goes towards making really amazing content. Thank you for the opportunity.. you have been so generous and friendly to let a 17 year old be a part of an agency for a couple of weeks.

Evie.

Day 8 – Classroom work in the outside world?!

Hello all!

Today was a busy day, as all good days are, sometimes. Anyways, it started out extremely interesting as I met the mysterious bad parker of building 11. Apparently, whoever they are, they always park on the line so that no car is to close to theirs. Usually it’s in the back, but today they were in the front row, so many, many more people saw them. Here’s what it looked like:


Incredibly rude, right? If you say no, I want you to move your car now. Literally, stop reading and move your car to the appropriate position. Done? Now let’s continue.

Today’s first task was aldehyde testing, and as we moved to Johnson building for the appropriate equipment, we ran across this little guy here:


… Or maybe not so little. The point is, the only reason I noticed was a startled scream that shocked me into stopping. That was fun, if slightly scary. Taking the long path due to Mrs. Michelle’s insistence, we finally arrived at our destination.

Now, we all know classroom work hardly seems like work in real life, right? Well, aldehyde sampling is a lot like classroom work, where we mix a bunch of chemicals and measure the results, but with this fancy machine:


Which is a HPLC system, or high pressure liquid chromatography system. This does a lot of minor measurements and records data that the naked eye wouldn’t normally see.

Anyways, after that we ate my final lunch at RTI before heading to meet Leag Johnson, a biochemist at RTI. After that meeting, I prepared sample filters for equilibration and post ODs/graphs.

Hope you enjoyed my day!

Cameron L.

P.S. Here’s some extras from today.

Hazardous waste dispenser 

Funny sign


Video of vacumn to get rid Air/gas

Containers for the aldehyde